ledmon (0.94-1) unstable; urgency=medium

  * New upstream release 0.94.
    - Support for AMD IPMI enclosure management.
    - Support for NPEM.
  * debian/control: add systemd, pkg-config and libpci-dev as build dependency.
  * debian/control: update Standards-Version to 4.5.0.
  * Add debian/ledmon.init.
  * debian/rules: fix typo and remove manual systemd installation.
  * Remove obsolete patch.

 -- Hsieh-Tseng Shen <woodrow.shen@gmail.com>  Thu, 13 Feb 2020 05:55:32 +0000

ledmon (0.93-3) unstable; urgency=medium

  * Fix 32bit compilation error to prevent shift-count-overflow.

 -- Hsieh-Tseng Shen <woodrow.shen@gmail.com>  Tue, 10 Dec 2019 05:34:46 +0000

ledmon (0.93-2) unstable; urgency=medium

  * Don't compile with flag address-of-packed-member to fix build failure.

 -- Hsieh-Tseng Shen <woodrow.shen@gmail.com>  Mon, 02 Dec 2019 03:52:31 +0000

ledmon (0.93-1) unstable; urgency=medium

  * Salvage ledmon for maintenance transition. (Closes: #939315)
  * New upstream release v0.93.
  * Remove obsolete patches.
  * Add debian/watch for importing upstream as tarball.

 -- Hsieh-Tseng Shen <woodrow.shen@gmail.com>  Tue, 05 Nov 2019 09:03:43 +0000

ledmon (0.90-0.1) unstable; urgency=low

  * Non-maintainer upload.
  * New upstream release. (Closes: #878271)
    - Fixes FTBFS with glibc 2.28. (Closes: #915476)

 -- Adrian Bunk <bunk@debian.org>  Fri, 11 Jan 2019 14:03:30 +0200

ledmon (0.79-2) unstable; urgency=high

  * Fix for 3.13 kernel change (LP: #1349920)

 -- Daniel Jared Dominguez <Jared_Dominguez@Dell.com>  Wed, 30 Jul 2014 14:19:11 -0500

ledmon (0.79-1) unstable; urgency=medium

  * Acknowledge NMUs. (Closes: #708673)
  * Putting all this into git.
  * Add VCS information to debian/control.

 -- Daniel Jared Dominguez <Jared_Dominguez@Dell.com>  Wed, 25 Jun 2014 16:44:07 -0500

ledmon (0.79-0.2) unstable; urgency=low

  * Non-maintainer upload.
  * Fix FTBFS on non-Linux  with "Architecture: linux-any"

 -- Kamal Mostafa <kamal@debian.org>  Tue, 03 Dec 2013 07:16:30 -0800

ledmon (0.79-0.1) unstable; urgency=low

  * Non-maintainer upload.
  * New upstream release.
  * Adds support for NVME SSD devices (uses nvme/nvmhci block driver).
  * Fix small coding error in ledctl.pod
  * Update help info regarding reporting bugs
  * Make sure addr is null-terminated
  * Check if the directory 'holders' exists
  * Check device for NULL before dereferencing
  * ledctl documentation improvements
  * Do not use ISO C99 standard
  * Do not send LED command if state of block device has not changed
  * Change ledmon's behavior during rebuild.
  * Correct some style problems using kernel's checkpatch.
  * Remove indentation info
  * Correct indentation according to the Linux coding style using indent
  * Update Copyright year to 2013
  * Fix support for Dell PCIe SSD Devices
  * More minor fixes revealed by a coverity scan
  * Minor fixes revealed by a coverity scan

 -- Kent Baxley <kb4xley@gmail.com>  Wed, 27 Nov 2013 15:33:27 -0600

ledmon (0.74-1) unstable; urgency=low

  * New upstream release:
  * restart of the ledmon's internal state when an unrecoverable error occurs
    (e.g. lack of disk's location)
  * logging level for not supported patterns changed from 'warning' to 'debug'
  * more detailed information about device change (name changed, missing)
  * added extra checks against device presence in sysfs (device may disappear
    at anytime: during rescan, initialization, sending command)
  * pattern "locate_off" fixed
  * SES-2 support for enclosures
  * New patterns (SES-2) in ledctl for drives in enclosures
  * Improved LED blinking and slot locations for AHCI and SCSI DA
  * ledctl and ledmon were converted to the raw bitstream (TX_GP) interface,
    so they do not need additional SGPIO support in the kernel now
    (by Dan Williams <dan.j.williams@intel.com>)
  * the way ledctl works has been changed: so far turning on some LEDs
    did not change the state of all other LEDs of all controllers,
    now turning on some LEDs turns off all other LEDs of all controllers
  * ledctl's manual was corrected and updated

 -- Daniel Jared Dominguez <Jared_Dominguez@Dell.com>  Thu, 23 Aug 2012 16:28:32 -0500

ledmon (0.32-1) unstable; urgency=low

  * New upstream release
  * Fixes issue where HOTSPARE had higher priority than REBUILD

 -- Daniel Jared Dominguez <Jared_Dominguez@Dell.com>  Mon, 05 Mar 2012 11:41:06 -0600

ledmon (0.31-1) unstable; urgency=low

  * Initial release (Closes: #658815)

 -- Daniel Jared Dominguez <Jared_Dominguez@Dell.com>  Mon, 23 Jan 2012 13:45:41 -0600
