/****************************************************************************
**
** Copyright (C) 2017 The Qt Company Ltd.
** Contact: https://www.qt.io/licensing/
**
** This file is part of Qbs.
**
** $QT_BEGIN_LICENSE:FDL$
** Commercial License Usage
** Licensees holding valid commercial Qt licenses may use this file in
** accordance with the commercial license agreement provided with the
** Software or, alternatively, in accordance with the terms contained in
** a written agreement between you and The Qt Company. For licensing terms
** and conditions see https://www.qt.io/terms-conditions. For further
** information use the contact form at https://www.qt.io/contact-us.
**
** GNU Free Documentation License Usage
** Alternatively, this file may be used under the terms of the GNU Free
** Documentation License version 1.3 as published by the Free Software
** Foundation and appearing in the file included in the packaging of
** this file. Please review the following information to ensure
** the GNU Free Documentation License version 1.3 requirements
** will be met: https://www.gnu.org/licenses/fdl-1.3.html.
** $QT_END_LICENSE$
**
****************************************************************************/

/*!

//! [all-products]

    \section2 \c --all-products

    Processes all \l{Product}{products}, even if their \c builtByDefault
    property is \c false.

//! [all-products]

//! [blacklist]

    \section2 \c {--blacklist <blacklist>}

    Ignores files whose names match the patterns specified by \c <blacklist>.
    The list entries can contain wildcards and are separated by commas.

    By default, no files are ignored.

//! [blacklist]

//! [build-directory]

    \section2 \c {--build-directory|-d <directory>}

    Specifies a \c <directory> where build artifacts are stored.

    The default value is the current directory unless
    \c preferences.defaultBuildDirectory is set.

    Relative paths will be interpreted relative to the current directory.

    You can use the following special values as placeholders:

    \list
        \li \c @project is expanded to the name of the project file excluding
            the extension \c .qbs.
        \li \c @path is expanded to the name of the directory containing the
            project file.
    \endlist

//! [build-directory]

//! [changed-files]

    \section2 \c {--changed-files <file>[,<file>...]}

    Assumes that the files specified by \c <file>, and only those files, have
    changed.

//! [changed-files]

//! [check-outputs]

    \section2 \c --check-outputs

    Forces transformer output \l{Artifact}{artifact} checks.

    Verifies that the output artifacts declared by \l{Rule}{rules} in the
    \l{Project}{project} are actually created.

//! [check-outputs]

//! [check-timestamps]

    \section2 \c --check-timestamps

    Forces timestamp checks.

    Retrieves the timestamps from the file system, instead of using the file
    timestamps that are stored in the build graph.

//! [check-timestamps]

//! [clean-install-root]

    \section2 \c --clean-install-root

    Removes the installation base directory before installing.

//! [clean-install-root]

//! [command-echo-mode]

    \section2 \c {--command-echo-mode <mode>}

    Determines what kind of output to show when executing commands.

    Possible values of \c <mode> are:

    \list
        \li \c silent
        \li \c summary (default value)
        \li \c command-line
        \li \c command-line-with-environment
    \endlist

//! [command-echo-mode]

//! [detect-qt-versions]

    \section2 \c --detect

    Attempts to auto-detect all known Qt versions, looking them up in the PATH
    environment variable.

//! [detect-qt-versions]

//! [detect-toolchains]

    \section2 \c --detect

    Attempts to auto-detect all known toolchains, looking them up in the PATH
    environment variable.

//! [detect-toolchains]

//! [dry-run]

    \section2 \c --dry-run|-n

    Performs a dry run. No commands will be executed and no permanent changes to
    the build graph will be done.

//! [dry-run]

//! [export]

    \section2 \c {--export <file>}

    Exports settings to the specified \c <file>.

//! [export]

//! [project-file]

    \section2 \c {[--file|-f <file>]}

    Uses \c <file> as the project file. If \c <file> is a directory and it
    contains a single file with the extension \c .qbs, that file will be used.

    If this option is not given at all, the behavior is the same as for
    \c{-f <working-dir>}.

//! [project-file]

//! [flat]

    \section2 \c --flat

    Does not create nested project files, even if there are subdirectories and
    the top-level directory does not contain any files.

//! [flat]

//! [force-probe-execution]

    \section2 \c --force-probe-execution

    Forces re-execution of all \l{Probe} items' configure scripts,
    rather than using the cached data.

//! [force-probe-execution]

//! [generator]

    \section2 \c {--generator|-g <generator>}

    Uses the specified build system generator.

    Possible values of \c <generator> include:

    \list
        \li \c clangdb
        \li \c visualstudio2015
    \endlist

    The available generators are listed if you run the \c {qbs generate} command
    without passing a generator to it.

//! [generator]

//! [help]

    \section2 \c {--help|-h|-?}

    Displays help for the command.

//! [help]

//! [import]

    \section2 \c {--import <file>}

    Imports settings from the specified \c <file>.

//! [import]

//! [install-root]

    \section2 \c {--install-root <directory>}

    Installs into the specified \c <directory>. If the directory does not exist,
    it will be created.

    The default value is \c <build dir>/install-root.

    Use the special value \c @sysroot to install into the \c sysroot. That is,
    the value of the \l{qbs::sysroot}{qbs.sysroot} property.

//! [install-root]

//! [jobs]

    \section2 \c {--jobs|-j <n>}

    Uses \c <n> concurrent build jobs, where \c <n> must be an integer greater
    than zero.

    The default is the number of logical cores.

//! [jobs]

//! [keep-going]

    \section2 \c --keep-going|-k

    Keeps going when errors occur, if at all possible.

//! [keep-going]

//! [less-verbose]

    \section2 \c --less-verbose|-q

    Becomes more quiet by decreasing the log level by one. This option can be
    given more than once. Excessive occurrences have no effect.

    If the option \c --log-level appears anywhere on the command line in
    addition to this option, its value is taken as the base for the decrease.

//! [less-verbose]

//! [list-root]

    \section2 \c {--list [<root> ...]}

    Lists keys under the key \c <root> or all keys if the root is not specified.

    Possible values are:

    \list
        \li \c defaultProfile is the default \l{Profile}{profile} to use
            if a profile is not specified
        \li \c preferences accepts build preferences as second-level keys
        \li \c profiles accepts profile names as second-level keys

    \endlist

//! [list-root]

//! [log-level]

    \section2 \c {--log-level <level>}

    Uses the specified log level.

    Possible values of \c <level> are:

    \list
        \li \c error
        \li \c warning
        \li \c info (default value)
        \li \c debug
        \li \c trace
   \endlist

//! [log-level]

//! [log-time]

    \section2 \c --log-time

    Logs the time that the operations involved in this command take.

    This option is implied in log levels \c debug and higher.

    This option is mutually exclusive with \c --show-progress.

//! [log-time]

//! [more-verbose]

    \section2 \c --more-verbose|-v

    Becomes more verbose by increasing the log level by one. This option can be
    given more than once. Excessive occurrences have no effect.

    If the option \c --log-level appears anywhere on the command line in
    addition to this option, its value is taken as the base for the increase.

//! [more-verbose]

//! [ndk-dir]

    \section2 \c {--ndk-dir <directory>}

    Specifies a \c <directory> that contains an Android NDK.

//! [ndk-dir]

//! [no-build]

    \section2 \c --no-build

    Does not re-build the project before installing or running it.

//! [no-build]

//! [no-install]

    \section2 \c --no-install

    Does not install any artifacts as part of the build process.

//! [no-install]

//! [products-specified]

    \section2 \c {--products|-p <name>[,<name>...]}

    Takes only the \l{Product}{products} specified by \c <name> and their
    dependencies into account.

//! [products-specified]

//! [qt-dir]

    \section2 \c {--qt-dir <directory>}

    Specifies a \c <directory> that contains a Qt version.

//! [qt-dir]

//! [sdk-dir]

    \section2 \c {--sdk-dir <directory>}

    Specifies a \c <directory> that contains an Android SDK.

//! [sdk-dir]

//! [settings-dir]

    \section2 \c {--settings-dir <directory>}

    Reads all settings (such as \l{Profile}{profile} information) from the
    specified \c <directory>. If the directory does not exist, it will be
    created.

    The default value is system-specific. For example:

    \list
        \li Linux: \c $HOME/.config/QtProject/qbs
        \li Windows: \c %APPDATA%\QtProject\qbs
        \li macOS: \c $HOME/Library/Preferences/qbs
    \endlist

//! [settings-dir]

//! [setup-run-env-config]

    \section2 \c --setup-run-env-config

    A comma-separated list of strings. They will show up in the \c config
    parameter of all \l{Module::}{setupRunEnvironment} scripts.

//! [setup-run-env-config]


//! [show-progress]

    \section2 \c --show-progress

    Shows how command execution is progressing.

    This option is mutually exclusive with \c --log-time.

    \note This option is not available on a Windows host.

//! [show-progress]

//! [type]

    \section2 \c {--type <toolchain type>}

    Specifies the type of the toolchain. Needed if \QBS cannot determine the
    compiler from the name of the executable file located in the specified
    directory.

    Possible values include:

    \list
        \li \c clang
        \li \c gcc
        \li \c mingw
        \li \c msvc
     \endlist

//! [type]

//! [unset]

    \section2 \c {--unset <key>}

    Removes the specified \c <key>.

//! [unset]

//! [wait-lock]

    \section2 \c --wait-lock

    Waits indefinitely for other processes to release the build graph lock.

    This option is typically used by \l{Generators}{generators}, which may
    re-invoke multiple \QBS processes on the same project simultaneously.

//! [wait-lock]

//! [whitelist]

    \section2 \c {--whitelist <whitelist>}

    Considers only files whose names match the patterns specified by
    \c <whitelist>. The list entries can contain wildcards and are separated by
    commas.

    By default, all files are considered.

//! [whitelist]

*/
