[Index] |  | [TOC]

# FreeType-2.4.12 API Reference

# The auto-hinter

## Synopsis

| glyph-to-script-map |  | fallback-script
| FT_AUTOHINTER_SCRIPT_XXX |  | increase-x-height
| FT_Prop_GlyphToScriptMap |  | FT_Prop_IncreaseXHeight

While FreeType's auto-hinter doesn't expose API functions by itself, it is possible to control its behaviour with FT_Property_Set and FT_Property_Get. The following lists the available properties together with the necessary macros and structures. Note that the auto-hinter's module name is ‘autofitter’ for historical reasons.

#### glyph-to-script-map
The auto-hinter provides various script modules to hint glyphs. Examples of supported scripts are Latin or CJK. Before a glyph is auto-hinted, the Unicode character map of the font gets examined, and the script is then determined based on Unicode character ranges, see below. OpenType fonts, however, often provide much more glyphs than character codes (small caps, superscripts, ligatures, swashes, etc.), to be controlled by so-called ‘features’. Handling OpenType features can be quite complicated and thus needs a separate library on top of FreeType. The mapping between glyph indices and scripts (in the auto-hinter sense, see the FT_AUTOHINTER_SCRIPT_XXX values) is stored as an array with ‘num_glyphs’ elements, as found in the font's FT_Face structure. The ‘glyph-to-script-map’ property returns a pointer to this array which can be modified as needed. Note that the modification should happen before the first glyph gets processed by the auto-hinter so that the global analysis of the font shapes actually uses the modified mapping. The following example code demonstrates how to access it (omitting the error handling).
      FT_Library                library;
      FT_Face                   face;
      FT_Prop_GlyphToScriptMap  prop;

      FT_Init_FreeType( &library );
      FT_New_Face( library, "foo.ttf", 0, &face );

      prop.face = face;

      FT_Property_Get( library, "autofitter",
                                "glyph-to-script-map", &prop );

      // adjust `prop.map' as needed right here

      FT_Load_Glyph( face, ..., FT_LOAD_FORCE_AUTOHINT );

[Index] |  | [TOC]

#### FT_AUTOHINTER_SCRIPT_XXX
Defined in FT_AUTOHINTER_H (freetype/ftautoh.h).
    #define FT_AUTOHINTER_SCRIPT_NONE   0
    #define FT_AUTOHINTER_SCRIPT_LATIN  1
    #define FT_AUTOHINTER_SCRIPT_CJK    2
    #define FT_AUTOHINTER_SCRIPT_INDIC  3
A list of constants used for the glyph-to-script-map property to specify the script submodule the auto-hinter should use for hinting a particular glyph.
values
FT_AUTOHINTER_SCRIPT_NONE
| Don't auto-hint this glyph.
FT_AUTOHINTER_SCRIPT_LATIN
| Apply the latin auto-hinter. For the auto-hinter, ‘latin’ is a very broad term, including Cyrillic and Greek also since characters from those scripts share the same design constraints. By default, characters from the following Unicode ranges are assigned to this submodule.
      U+0020 - U+007F  // Basic Latin (no control characters)
      U+00A0 - U+00FF  // Latin-1 Supplement (no control characters)
      U+0100 - U+017F  // Latin Extended-A
      U+0180 - U+024F  // Latin Extended-B
      U+0250 - U+02AF  // IPA Extensions
      U+02B0 - U+02FF  // Spacing Modifier Letters
      U+0300 - U+036F  // Combining Diacritical Marks
      U+0370 - U+03FF  // Greek and Coptic
      U+0400 - U+04FF  // Cyrillic
      U+0500 - U+052F  // Cyrillic Supplement
      U+1D00 - U+1D7F  // Phonetic Extensions
      U+1D80 - U+1DBF  // Phonetic Extensions Supplement
      U+1DC0 - U+1DFF  // Combining Diacritical Marks Supplement
      U+1E00 - U+1EFF  // Latin Extended Additional
      U+1F00 - U+1FFF  // Greek Extended
      U+2000 - U+206F  // General Punctuation
      U+2070 - U+209F  // Superscripts and Subscripts
      U+20A0 - U+20CF  // Currency Symbols
      U+2150 - U+218F  // Number Forms
      U+2460 - U+24FF  // Enclosed Alphanumerics
      U+2C60 - U+2C7F  // Latin Extended-C
      U+2DE0 - U+2DFF  // Cyrillic Extended-A
      U+2E00 - U+2E7F  // Supplemental Punctuation
      U+A640 - U+A69F  // Cyrillic Extended-B
      U+A720 - U+A7FF  // Latin Extended-D
      U+FB00 - U+FB06  // Alphab. Present. Forms (Latin Ligatures)
     U+1D400 - U+1D7FF // Mathematical Alphanumeric Symbols
     U+1F100 - U+1F1FF // Enclosed Alphanumeric Supplement
FT_AUTOHINTER_SCRIPT_CJK
| Apply the CJK auto-hinter, covering Chinese, Japanese, Korean, old Vietnamese, and some other scripts. By default, characters from the following Unicode ranges are assigned to this submodule.
      U+1100 - U+11FF  // Hangul Jamo
      U+2E80 - U+2EFF  // CJK Radicals Supplement
      U+2F00 - U+2FDF  // Kangxi Radicals
      U+2FF0 - U+2FFF  // Ideographic Description Characters
      U+3000 - U+303F  // CJK Symbols and Punctuation
      U+3040 - U+309F  // Hiragana
      U+30A0 - U+30FF  // Katakana
      U+3100 - U+312F  // Bopomofo
      U+3130 - U+318F  // Hangul Compatibility Jamo
      U+3190 - U+319F  // Kanbun
      U+31A0 - U+31BF  // Bopomofo Extended
      U+31C0 - U+31EF  // CJK Strokes
      U+31F0 - U+31FF  // Katakana Phonetic Extensions
      U+3200 - U+32FF  // Enclosed CJK Letters and Months
      U+3300 - U+33FF  // CJK Compatibility
      U+3400 - U+4DBF  // CJK Unified Ideographs Extension A
      U+4DC0 - U+4DFF  // Yijing Hexagram Symbols
      U+4E00 - U+9FFF  // CJK Unified Ideographs
      U+A960 - U+A97F  // Hangul Jamo Extended-A
      U+AC00 - U+D7AF  // Hangul Syllables
      U+D7B0 - U+D7FF  // Hangul Jamo Extended-B
      U+F900 - U+FAFF  // CJK Compatibility Ideographs
      U+FE10 - U+FE1F  // Vertical forms
      U+FE30 - U+FE4F  // CJK Compatibility Forms
      U+FF00 - U+FFEF  // Halfwidth and Fullwidth Forms
     U+1B000 - U+1B0FF // Kana Supplement
     U+1D300 - U+1D35F // Tai Xuan Hing Symbols
     U+1F200 - U+1F2FF // Enclosed Ideographic Supplement
     U+20000 - U+2A6DF // CJK Unified Ideographs Extension B
     U+2A700 - U+2B73F // CJK Unified Ideographs Extension C
     U+2B740 - U+2B81F // CJK Unified Ideographs Extension D
     U+2F800 - U+2FA1F // CJK Compatibility Ideographs Supplement
FT_AUTOHINTER_SCRIPT_INDIC
| Apply the indic auto-hinter, covering all major scripts from the Indian sub-continent and some other related scripts like Thai, Lao, or Tibetan. By default, characters from the following Unicode ranges are assigned to this submodule.
      U+0900 - U+0DFF  // Indic Range
      U+0F00 - U+0FFF  // Tibetan
      U+1900 - U+194F  // Limbu
      U+1B80 - U+1BBF  // Sundanese
      U+1C80 - U+1CDF  // Meetei Mayak
      U+A800 - U+A82F  // Syloti Nagri
     U+11800 - U+118DF // Sharada
Note that currently Indic support is rudimentary only, missing blue zone support.

[Index] |  | [TOC]

#### FT_Prop_GlyphToScriptMap
Defined in FT_AUTOHINTER_H (freetype/ftautoh.h).
       typedef struct  FT_Prop_GlyphToScriptMap_
       {
         FT_Face   face;
         FT_Byte*  map;

       } FT_Prop_GlyphToScriptMap;
The data exchange structure for the glyph-to-script-map property.

[Index] |  | [TOC]

#### fallback-script
If no auto-hinter script module can be assigned to a glyph, a fallback script gets assigned to it (see also the glyph-to-script-map property). By default, this is FT_AUTOHINTER_SCRIPT_CJK. Using the ‘fallback-script’ property, this fallback value can be changed.
      FT_Library  library;
      FT_UInt     fallback_script = FT_AUTOHINTER_SCRIPT_NONE;

      FT_Init_FreeType( &library );

      FT_Property_Set( library, "autofitter",
                                "fallback-script", &fallback_script );
note
This property can be used with FT_Property_Get also. It's important to use the right timing for changing this value: The creation of the glyph-to-script map which eventually uses the fallback script value gets triggered either by setting or reading a face-specific property like glyph-to-script-map, or by auto-hinting any glyph from that face. In particular, if you have already created an FT_Face structure but not loaded any glyph (using the auto-hinter), a change of the fallback glyph will affect this face.

[Index] |  | [TOC]

#### increase-x-height
For ppem values in the range 6 <= ppem <= ‘increase-x-height’, round up the font's x height much more often than normally. If the value is set to 0, which is the default, this feature is switched off. Use this property to improve the legibility of small font sizes if necessary.
      FT_Library               library;
      FT_Face                  face;
      FT_Prop_IncreaseXHeight  prop;

      FT_Init_FreeType( &library );
      FT_New_Face( library, "foo.ttf", 0, &face );
      FT_Set_Char_Size( face, 10 * 64, 0, 72, 0 );

      prop.face  = face;
      prop.limit = 14;

      FT_Property_Set( library, "autofitter",
                                "increase-x-height", &prop );
note
This property can be used with FT_Property_Get also. Set this value right after calling FT_Set_Char_Size, but before loading any glyph (using the auto-hinter).

[Index] |  | [TOC]

#### FT_Prop_IncreaseXHeight
Defined in FT_AUTOHINTER_H (freetype/ftautoh.h).
       typedef struct  FT_Prop_IncreaseXHeight_
       {
         FT_Face  face;
         FT_UInt  limit;

       } FT_Prop_IncreaseXHeight;
The data exchange structure for the increase-x-height property.

[Index] |  | [TOC]